DSR 905 Back View Larger Back View

DSR905 SideCar Back View

1 Power Cord Connection (AC 120Volts 60Hz 50W)
2 Coaxial Out (DSR905) To Analog Receiver In (C & Ku bands)
3 Coaxial In From Your Big Dish (C & Ku Bands)
4 HSI Data Out
5 Audio/Video In from Analog Receiver
6 Dual Audio Out (Right and Left Audio)
7 Dual Video Out
8 Channel 3/4 Selection
9 Coaxial TV output (Channel 3/4)
10 Off-Air Antenna Input (Coaxial)
11 Polarizer Control (Skew In, +5VP In, GND, CH/KV IN) ... connect the bottom row to your analog IRD polarity connections using the cable that shipped with the receiver. CH/KV is rarely used and usually does not need to be connected.
12 Polarizer Control (Skew Out, +5VP Out, CH/kV Out, +5V, GND) ... connect cable leads from the feedhorn (wires from the dish) here to the top row. CH/KV is rarely used and usually does not need to be connected
13 Telephone In Connection

 

<--Back