Listed below are some master passwords for some C-Band receivers:

 

 

 - CHAPARRAL: Cheyene   - Press A, F, 9, 4, Sat, then store on remote. 

                          (master clear).

 

              Sierra    - Press A, F, 8, 9, Sat, then store on remote.

                          (master clear).

          

              Sierra II - Press A, F, 9, 4, Sat, then store on remote.

                          (master clear).

 

             Sierra II+ - Press A, F, 9, 4, Sat, then store on remote.

                          (master clear).

 

            Cheyene IRD - Press A, F, 9, 4, Sat, then store on remote.

                          (master clear).

 

             Sierra IIl - Press A, F, 9, 4, Sat, then store on remote.

                          (master clear).

 

 

 - MONTEREY - program password = 2, 3, 4, 5,

 

      MONTEREY master clear procedures:

 

              MONTEREY 50, 70, 90, 55, 95 - while the Rx is in standby mode

              depress the enter and volume-up key simultaneously, then press

              and release power key, after 10 seconds release the enter and

              volume-up keys.

 

              MONTEREY 30, 35 - while in standby mode, depress the master

              reset button located at the back, then press and release power

              key, wait 10 seconds and then release master reset button.

 

 

 - GENERAL INSTRUMENTS (Now MOTOROLA 4DTV):

 

             GI 2400, 2410, 2500 and 2600 - with the memory lock light off,

             press simultaneously the alpha, num and store keys for 5 seconds;

             the front panel satellite display will show a "star" and a "dash"

             after the master clear sequence is complete.  If the memory lock

             light does not turn off, after depressing the mem-lock key for 5

             seconds, then the Parental Security has been set on a specific

             channel; scroll up or down through the channels to find the

             "undisplayed" channel, enter the channel number and then press

             the PS key on the remote.

 

 

GI 2650, all 2700 series and Innovation receivers, 4DTV (920, 921, 922 & DSR905 Digital SideCar - when   prompted for a password enter: 92121. Note the on-screen display will prompt you for more than five digits, all you must enter is five though.

 

 

 

- HOUSTON TRACKER,

    

              Echostar, Tracker 8+, Tracker V - when prompted for a password

              press 7907878 or MAST (8472).

 

              Tracker 8 - when prompted for a password press 2226903.

 

              Echostar 3000,4000,(new) - 2406. Echostar 310, 410 - MAST (8472)

              enter when prompted.

 

              Tracker 8+, 9. 10, 10+,

              Echostar  6000, 510, 710 - press XF(63), press 8472, select

              installation, press enter twice.

 

              Echostar 4000(old two piece) - press memory lock then enter 437.

 

 

 

 - TOSHIBA: All Models - lO48.

 

 

 - UNIDEN:    Super 4400 - enter 3315

                UST 45OO - 33573,

                UST 4800 - 4700, President (all models) - 8770.

 

 

 - PANASONIC: CRD4500 or 700 - parental lock = 3872, set-up = 5172.

 

 

 - CHANNEL MASTER: 6442 - Hold menu key and then simultaneously press power

                          key while unit is in stanby mode.

 

 

 - DRAKE: ESR 1024, 1124 - press 1024 (for complete memory clear).

 

          ESR 1024, ll24, 1324, 1424, 1724, 1624, 1724, and 1824 - press HELP

                          and enter 0000 (parental delete).

 

 

 - COMMAND PERFORMANCE AVANTI - enter 3900

 

 

 - KENWOOD KSR 1000 - enter 9999

General Instrument 4DTV ------------- Options 6,778,7,accept
General Instrument (other) ------------- 92121

Echostar/HTS series ------------------- MAST,222-6903,790-7878
HTS 40-70/ Echo 400-600 ------------- menu 63 8472 then hit 4 Enter.
HTS VIII+ (old software)---------------6-3-4-7-9-0-7-8-7-8-SAT/ENTER
(new software)---------------6-3-8-4-7-2-5- SAT/ENTER
Uniden PS-600XL or PS-1000 -------- 8570
Uniden UST-4400 Super --------------- 3315
Uniden UST-4500/4600/4900 --------- 3573
Supra/Ultra/ & all the SQ -------------- 3573
Uniden 4800 & 4800+ ----------------- 4700
Chaparral ------------------------------- 2345
Toshiba --------------------------------- 1048
DX -------------------------------------- ABCE

Channel Master:
6442 - Hold menu key and then simultaneously press power key while unit is in standby mode.
--------------------
Chaparral: Master Clear
Cheyenne - Press AF94, Sat, then ***** on remote.
Cheyenne IRD - Press AF94, Sat, then ***** on remote.
Sierra, - Press AF89, Sat, sore on remote.
Sierra II, Sierra II+, Sierra III - Press AF94, Sat, then ***** on remote.
Monterey - Program password=2345
Monterey - Master Clear
Monterey 50, 55, 70, 90, 95 - While in standby mode, press and hold the volume up and enter at the same time.
Then press and release the power key. After 10 seconds release the enter and volume up keys.
Monterey 30, 35 - While in standby mode, press the master reset button located at the back, then press and release power key.

Wait 10 seconds then release master reset button.
---------------------
Command Performance Avanti:
Enter 3900
---------------------

Houston Tracker:
Tracker 4 & 5 - Installation # = 7907878
Tracker 4 & 5 - Parental Lock # = 9080112
Tracker 6, 7, 8 - Installation # = 2226903
Tracker 6, 7, 8 - Parental Lock # = 9429
Echostar 3000, 4000 (new), 2406, Echostar 310, 410 - Enter MAST (8472).
Tracker 8+, 9, 10, 10+, Echostar 6000, 510, 710 -
Press XF(63), press 8472, select installation, press enter twice.
Echostar 4000 (old two piece) -
Press memory lock then enter 437. Must enter the extra features( xf or menu).Then
enter '8472". Go to the installation menu, now
when asked for the password,press enter on
remote.-- this will set installation password back
to the factory default of the "ENTER" button
on remote.
Tracker 8+, T9, T10,and T10+
System 30.40,50,70
Echostar SRD-310, 410, 510, and 710
Echo 400, 500, and 600 series receivers
----------------------
Other Echostar and Houston Tracker models:
Model Installation Password Parental Lock Password
HTS 6 XF-2226903-enter XF-2-9429-enter
HTS 7 63-5-2226903-enter 63-2-9429-enter
HTS 8 63-5-2226903-enter 63-2-9429-enter
HTS 4 63-1-7907878-enter N.A. Tune video & *****
HTS 5 63 or XF-4-7907878-enter 63 or XF-2-9080112-enter
HTS 8+ (OS) XF-4-7907878-enter XF-2-9080112-enter
HTS 8_ (NS) 63-8472-5-enter 63-8472-enter
HTS 9 63-8472-4-enter 63-8472-2-enter
HTS 10 63-8472-5-enter 63-8472-2-enter
HTS 10+ 63-8472-4-enter 63-8472-2-enter
HTS 30 Menu-63-8472-4 Menu-63-8472-2-enter
HTS 40 Menu-63-8472-4 Menu-63-8472-2
HTS 50 Menu-63-8472-4 Menu-63-8472-2
HTS 70 Menu-63-8472-4 Menu-63-8472-2
ELITE 8472 When requested 8472 When Asked
E4000R (OS) Memory lock 5 secs. Release
E4000R (OS) Memory lock 5 secs. 4-3-7 on remote Release Memory lock
E7000 63-4-2226903-enter 63-2-9429-enter
E8000 63-5-2226903-enter 63-2-9429-enter
E3000 (INSTAL) 63-if display not F--,2406 enter
PS-2406-enter
E4000 (NS) 63-if display not F--, -2406-enter
PS-2406-enter
E5000 (OS) 63-if display not F--,-2406-enter
PS-2406-enter
E5000 (NS) 63-4-7907878-enter 63-2-9080112-enter
E6000 (OS) XF-once--4-7907878-enter PS-twice-9080112-enter
E6000 (NS) XF-once-8472-5-enter PS-twice-8472-2
E310 (see note) 63-1-8472-enter PS-twice-8472-enter
E410 63-1-8472-enter PS -twice-8472-2
E510 XF-once-8472-4 P. Lock-twice-8472 or XF-8472-2
E710 XF-once-8472-4 P. Lock-twice-8472 or XF-8472-2
E500 63-8472-4 63-8472-2
E600 63-8472-4 63-8472-2
E400 8472 When requested
*If the E310 is in LNBF mode, Press 80, A menu of 2 or 3 items will appear. Select the last option. XF will then be accessible. When Finished press 80, then 1.
------------------------
Kenwood:
KSR 1000 - Enter 9999
------------------------
Nextwave:
NCC-600 - Turn off power, turn on while holding PRG button on remote. Go to clear memory and enter 0500.
------------------------
Panasonic:
CRD 4500 or 700 - Parental lock = 3872, Setup =5172
PS-700EX - Setup# = 5172, Installation # = 3872
------------------------
Toshiba:
All models - 1048
------------------------
Uniden:
President (all models) - 8570
SQ530, SQ560, SQ560 - 3573
Super 4400 - 3315
Supra - 3573
Ultra - 3573
UST 2020, 4500, 4600, 4700, 4800, 4900 - 3573
-------------------------
Drake Receivers:
Installation password model number, i.e. 1324-1424-1524-1624
Parental lock password HELP-LOCK-0000
--------------------------
DX Communications:
DSZ-200 ABCE (user) or 6789 (dealer)
--------------------------
Janeil Fujitsu:
Model# Lockout Password
FSR500 9867
FSR4900 or 4750 9867 or 0000
--------------------------
Super Guide:
SG-1000 - 3500
--------------------------
Zenith All Models:
Password is the Model Number. 1000, 2000
Parental lock password is HELP 911
--------------------------
Norsat JR 300 AF:
Make sure that the master programming lock is off. To do this
press LOCK, select Master, then select Off. Enter the 4-digit password,
the factory-preset password is 0-0-0-0
---------------------------
Personel Cable:
PC-2000-Press MENU. Press 7 for Program Mode Access. Enter the password, 2-0-0-0
---------------------------
STS Receivers:
MBS-LSR SR 300+, (SR 300) Move the ***** switch [located on the back of the receiver in the lower-left corner] to the ON position. Caution: there is also a master/slave switch near the ***** switch, it may cause all channels to go snowy if moved.
Press SELECT on the front of the receiver until Program Satellite Position Mode is displayed on the screen.
Wait a few seconds and the screen will display PRESS ***** TO START AUTO PROGRAM